SELAMIX

Wet the surface well with water, avoiding puddles. Apply SELAMIX using a brush, brush or fur broom, passing 8 to 10 times in the same place in an elongated way to close the pores and better compact the product. Subsequent coats should be done in the same way as the first, wetting the area and running the broom repeatedly over the product. Do not apply on surfaces with a temperature above 22ºC. SELAMIX must be applied in cross coats with an interval of 6 hours between applications in normal conditions and 24 hours in humid places or subject to trampling during application, or wait until the product has surface resistance. On slabs, keep the applied area in wet curing during the coats and 48 hours after the end of the last coat, spraying water with a high pressure washer or covering the surface with plastic tarpaulin. Drying after the last coat is 48 hours of good weather and full cure is 28 days. The prepared product should be applied in a maximum of 1 hour. In areas exposed to the sun (ultraviolet rays), and areas subject to traffic, after 5 days of applying SELAMIX, a mechanical protection must be carried out, with a subfloor, throughout the area. In water reservoirs for human or animal consumption, wash the surface three times, using water and a multipurpose brush, and discard the first load of water. In fish ponds, check the pH of the water before use.